Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - buddroyce

Pages: 1 ... 37 38 [39] 40 41 ... 44
571
The Pickup Place / Re: Cali guitar pups
« on: March 03, 2015, 01:11:04 PM »
I'm a bit skeptical. Designed and assembled in California sounds like some guy in designed the pickup, got the parts sent in from China and put the magnet in with the prewound bobbins. Technically speaking if I flew down to California from Canada for Namm, designed a pickup using parts from one of the Chinese vendors had the pickup and the magnet shipped to my buddy's place in San Diego so that his stay at home wife can put the magnet in and ship it from their house. I technically have a pickup that was designed and assembled in California.

If it was actually completely made in California, it would say something like Made in California or Crafted in California. It wouldn't make sense for me personally to order them in as $35 USD is about $45 CAD and before shipping and everything. By the time it gets here it'll be closer to $80 or even higher if they decided to ship it via UPS/FedEx and I get dinged with the $40 brokerage fee.

If you're in the US, it's really a decision of either getting one of these or a used DiMarzio/Duncan. I honestly don't see the value in these pickups right now.

572
Guitar Lounge / Re: New Guitar ... again
« on: March 03, 2015, 12:57:45 PM »
Hey!! Congrats on the find!

As for the middle, why not go for a PAF 36th or a bluesbucker? Actually I like the idea of a bluesbucker in the middle.

573
Gear Closet / Re: Picking Picks (picks, not pickups)
« on: March 02, 2015, 03:47:25 PM »
Not going to lie. Stats prove that most people spend their time at this place in the pickups section. The other sections don't get anywhere near as much love.

As for picks, I've been using the 1.5mm tortex sharp picks for years, but I think I'm one of the few people that actually like them. Just to be weirder, the favorite picks are the ones I've worn in a bit so that the sharp point on them are worn in to the angle I actually play. I'll have to take a picture sometime. Never been a huge fan of the Jazz III's myself. Don't know what it is about them.

574
The Pickup Place / Re: Want to replace Illuminators on MusicMan Majesty
« on: December 05, 2014, 02:37:58 AM »
What kind of rig are you running? I had a Doug Aldrich bridge and I just remember it having big thunderous bass which was awesome when playing alone but seemed to get lost when playing in a live band.

I really love the Transitions, the same way I love the Tone Zone. Some folks don't like the fuzz on the top end but I don't mind it. Especially when you're playing in a band with a singer and you need something that isn't super aggressive sounding. If you pull up the DiMarzio demo Steve Lukather did when the pickups were released, even if you don't have Luke's fingers, you'll get 80% of that sound pretty easily. Covers A LOT of ground much like the TZ and the Norton.

The Titans are are a great set of pickups that don't get enough love. It still has that PAF sound just a hell of a lot beefier. Definitely more metal and progressive rock in tone though.

The PAF Master is a fantastic set that I can say enough good thigns about. I recently has a review set installed in my ESP Potbelly and for the spread of stuff that you're looking to cover, it might actually do the trick.

Bare Knuckle does offer triangular ears. You just gotta custom order it. If you decide to go with the BKP's, I'd probably look at the Cold Sweat, the Holy Diver or the Steve Steven signature pickups. If you do go with them, tell them Budd from BRL Guitarworks sent you. I used to be the distributor for them here in Canada.

PS. There's also the Lundgren "The One" but that's if you really want to go for the high end boutique pickup.

575
Everything you wanted to know about .... / Re: PAF MASTER SET REVIEW
« on: November 07, 2014, 01:26:21 PM »
The lows feel about the same to me although the PAF Master does have more body to it than the Bluesbucker and a bit more crunch. The more I play with this, the more I'm tempted to just swap the Bluesbucker with the PAF Master as a permanent replacement.

I did finally, get a chance to try out the PAF Master neck in a high gain setting. Chords and what not on the lower registers definitely come out clear with without any mud.  Although I have to admit, it's probably not a sound I would use often as I do prefer how the bridge handles it the low notes better and I typically don't use the neck pickup for chords under high gain settings anyways.

Interestingly enough, after mentioning the Slash sound in my initial post, I decided to take a quick listen to some GnR and more specifically Appetite For Destruction since it's a sound that gets referenced pretty often by clients. With Slash's tone off the album fresh in my head, I tried to replicate the sound with the PAF Masters and my hot rodded Marshall clone and remarkably, it didn't need much tweaking!!! I don't know how close it is to the album, but compared to all the other pickups I've tried from DiMarzio it's the closest thing without requiring a lot of work. While the pickups don't do modern metal, they definitely do that hard rock without much problem.

Seriously guys, you need to try these out.

576
Everything you wanted to know about .... / Re: PAF MASTER SET REVIEW
« on: November 06, 2014, 03:24:46 PM »
The bluesbucker is definitely brighter with more spank compared to the PAF Master Neck. Pretty different sound really. I find the PAF Master neck to be smoother on the upper registers but that's kinda expected since the Bluesbucker is designed to sound like a P90.

577
Everything you wanted to know about .... / Re: PAF MASTER SET REVIEW
« on: November 05, 2014, 05:37:03 PM »
It definitely handles it better than the most neck pickups. Add 9 and 7th chords still chime through nicely with a bit of bite on the neck pickup. I'll have to give it a shot with a significant amount of gain but I don't think it's going to be any worse than the PAF 36th. If anything the extra top end would give the notes more clarity. Give me a day or two to test that out to give you a definitive answer.

578
Everything you wanted to know about .... / PAF MASTER SET REVIEW
« on: November 05, 2014, 05:19:26 PM »
PAF MASTER Neck & BRIDGE REVIEW

So… I woke up on my birthday to the sound of the mailman knocking on my door to be pleasantly surprised by a parcel from DiMarzio. It turns out they were nice enough to send me an evaluation set of the awesome new PAF Master humbuckers!!



PAF Master neck with the worn nickel cover and the bridge in the ever elusive double cream vintage glossy bobbins. Both standard spaced with vintage long legs and single conductor cables. Basically, a true vintage set.

Side note: This is the first time I’ve ever got the worn nickel covers from DiMarzio and I gotta say, I kinda like them!

Pic of the front of the neck pickup with the worn nickel cover
http://www.buddroyce.com/wp-content/uploads/2014/11/NeckFront.jpg
Back of the neck pickup.
http://www.buddroyce.com/wp-content/uploads/2014/11/NeckBack.jpg
Long legs with the awesome DiMarzio sun logo on the side!
http://www.buddroyce.com/wp-content/uploads/2014/11/BridgeSide.jpg

Seeing that the majority of my guitars are either routed for the triangular ears that are standard on most DiMarzio pickups, the number of guitars I could fit these pickups in were pretty slim. Since the pickups were probably a perfect fit in an old Les Paul that I don’t own. I decided to put them in the next best thing, My ESP Potbelly!!

http://www.buddroyce.com/wp-content/uploads/2014/11/HostDone.jpg

The setup: ESP Potbelly, 9-50’s strings (yes I'm weird that way), tuned E-Standard to a concert pitch of A432 (I said I was weird right?). The amp is my ever trusty Egnater seminar amp I built a few years back with a DiMarzio cloth covered cable in between. No effects, amp EQ set wide open.

First Impressions

Time to plug in the guitar, turn the amp to 11 and whacking the E power chord!! My first impression is…. :D (yes, the smiley face is the first impression. If a picture is worth 1000, an emoticon is worth at least 200). It’s got some really nice crunch, tight bottom end and enough roar to scare away little animals in the vicinity or at least my dog. It’s 110% Rock N’ Roll attitude.

In more detail

Compared to the PAF 36th, the bridge is definitely brighter with more bite and definition. The added upper mids gives the illusion of having more output than the 36th. The bottom end feels more defined and rounded than the 36th but doesn’t quite have the body that I’m used to having with the custom DiMarzio on the EBMM EVH. It’s great for everything from blues to Hard Rock but not so much for modern metal but definitely can pull off more of the vintage metal stuff.

I’m really impressed by how well the bridge pickup reacts to pick dynamics. Easing up on the attack almost feels like I’m rolling down the volume or cutting back on the presence, making it really easy to take everything down a notch or building up energy in a song really easy. What I used to do with my volume control with the higher output pickups I’m used to, I can do with my picking alone.

Switching over to the neck pickup with a decent amount of gain, the first thing that came to my mind oddly enough was… Slash.

I’m normally not one to refer to Slash and his tone but busting out pentatonics high up the fretboard just had a tone that screamed Sweet Child o’ Mine. Which is great for those that wanted that Slash sound but wanted to stick with the DiMarzio family of products. I honestly wouldn’t be surprised if the PAF Master was really DiMarzio’s take on the Seymour Duncan Alnico II Pro Slash pickups. It’s got nice body but with enough bite for a really smooth throaty tone. Dig the pick harder and you can hear the tone get a bit more aggressive, lighten the attack and it gets rounder. Very nice!!!!

(Now that I think about it, the bridge pickup through a modded JCM800 did have that Appetite For Destruction vibe to it).

It’s not quite as smooth and liquid like the Air Norton or liquifire but definitely can hold its own with the shredders. Especially for those looking for something closer to what Joe Satriani has without being too much like Joe, although I can totally see him using the bridge pickup in the neck position.

Going to the clean channel and staying on the neck pickup, it has the same bell like top end I found in the PAF 36th but with more body. Very nice for blues and jazz without any harshness. The low notes are clear and well defined without getting muddy. Multi note chords ring through without the notes getting lost. This gives the bluesbucker a run for the money as my go to pickup for clean tones.

The bridge on clean is a bit harsh as most bridge position humbuckers normally are, but crank up the gain on the clean channel and it’s got this fantastic sound when you just want a semi-clean tone with just little bit of break up. Here I can really feel how much my picking affects the tone. The notes break up while picking harder and then quickly clean up as I ease up. Normally I don’t typically use the bridge pickup on clean much but the PAF Master is slowly making me change my mind.

That’s it for my initial impression of the pickups. I’ll definitely have to give it another go, but I can definitely see the PAF Master set as having a permanent home in my guitars and definitely a pickup I’ll be recommend to others. If you wanted something like the PAF 36th bridge with a bit more attitude and bite while still maintaining that vintage PAF vibe, this is it!! Now if only they made a 7 string version.

579
The Pickup Place / Re: HFH vs Super 2 vs 36th
« on: November 02, 2014, 05:21:06 PM »
I was just going to recommend the PAF Master neck pickup. It's got the qualities of the PAF36th but with more bite.

580
The Pickup Place / Re: Wiring schematics and stuff
« on: October 13, 2013, 06:03:16 PM »
I'm pretty certain that the folks at DiMarzio do read the boards. After dealing with a bunch of other pickup companies, I do have to mention that the DiMarzio customer service is actually a cut above the rest.

581
The mini bar (off topic & misc) / Re: Hidden Gear Havens
« on: September 20, 2013, 05:56:12 PM »
I wonder if they ship to Canada. Must see if I can find their online shop.

582
Everything you wanted to know about .... / Re: The Air Norton
« on: September 20, 2013, 05:55:01 PM »
The Air Norton 7 probably isn't the best thing around for metal or anything where you want a lot of percussive rhythms. It's designed to sound more fluid and would probably be best for the 7 string guitar players that aren't looking for seriously heavy crunch. I'd probably use a dual AN7 if I ever had to do something where the guitar is just there to FILL the void in the background and support a singer.

583
I actually have a 2nd set of the DiMarzio/EBMM EVH pickups here that I had Steve Blutcher put new wires on for me(they came off an old EBMM EVH).  I can probably take some readings off that but that's about it, given how hard it was to get these I wouldn't want to mess with it.

Seeing that DiMarzio has an exclusivity contract with EBMM for those pickups, it's highly plausible that they did actually use new technology before it was patented in it.

584
I'm a forum troll/lurker there :|

Oh yeah you can also count Frank Falbo but I'm not too sure how active he is there since he left SD.

585
The Pickup Place / Re: Neck & middle singles for metal/rock strat
« on: March 15, 2013, 10:57:49 AM »
For the neck since you're looking for something round and rude for more detuned metal here's my suggestions

Fast Track 2 (see Rob Marcello of Danger Danger http://www.youtube.com/watch?v=baPMMDDosGE )
The Chopper (Trying to find a good video. The two players that I can think of that use it are Ron Thal of Bumblefoot/Guns N Roses and Henrik Danhage of Evergrey/Death Destruction)
Injector neck (http://www.youtube.com/watch?v=mHGv5FCS2j8 )

For the middle position, my recommendation for that guitar is either the Cruiser neck or one of the Area models.

Pages: 1 ... 37 38 [39] 40 41 ... 44