« Reply #1 on: March 24, 2026, 11:05:51 AM »
Hi Jim,
The Fender Noiseless pickup are two wire pickups with one extra ground wire - basically the same as the Injectors (if you ignore the combined black and white wires). So the Injectors should work with the S1 switch.
I also found an article about the general S1 wiring options here:
https://www.fender.com/articles/setup/how-the-s-1-switch-gives-you-more-tonal-optionsIt seems like all switching options only require pickups that have two signal wires and a separate ground wire, confirming my impression that the Injectors should work in this application.
Cheers Stephan

Logged
Area 67, Area 58, Area 61, VV Pro 54, Injectors, VV HB2, Virtual Solo, SDS-1, Area T, Area T 615, Virtual Hot T, Chopper T, Bluesbucker, Breed set, Air Norton, Super Distortion, DLX+ set, DLX-90, DP240, DP198, DP168, VPAF b, AT-1, Mo' Joe, FRED, Super 2; GS b