1

The Pickup Place / Re: Gravity Storm and RG550 Wiring Help

« on: March 09, 2019, 10:31:58 PM »

Your middle pickup is just out of phase with your bridge and neck pickup. The easiest way to fix it should be to switch the hot and ground wire on your middle pickup. Put the wire that is currently going to ground to the hot switch lug and the wire currently going to the hot switch lug to ground on the back of the pot. Should fix it.

That's what it was!!

Thanks everyone for the help!! 

2

The Pickup Place / Gravity Storm and RG550 Wiring Help

« on: March 09, 2019, 03:42:41 PM »

Hey everyone, I just got a new Ibanez Genisis RG550 and also picked up some Gravity Storm pickups. I kept the original middle pick and wired the guitar this way.

Gravity Storm pickups: black + white wires taped together, red to correct positions on the switch.
Left the middle pickup wired as it was from the factory.

My issue seems to be that when you switch to positions 2 & 4 the pickups sound thin and aren't usable at all.
Position 2 should be bridge + middle
Position 4 should be neck + middle

I used this diagram.

https://d2emr0qhzqfj88.cloudfront.net/s3fs-public/diagrams/RG270%2C350-3hb.pdf

Can anyone tell me what could be wrong? The neck, bridge and middle all sound fine on their own. Could the cap on the volume pot be causing this?