DiMarzio Forum
DimarzioForum.Com => The Pickup Place => Topic started by: w2dodge on April 01, 2020, 09:27:48 AM
-
Need some help....I have a Ibanez usrg30 I bought used ...with non original pickups and switch...how I know I own 4 of the same model...so I got dimarzio super switch...which is a little different than the usrg30 switch......I put new dimarzio SD in bridge and Deminion in neck...both 4 conductor ...so I'd like to wire them like to factory spec of usrg30 model...which is as follows:
bridge
bridge and neck split
bridge and neck
bridge inside and neck inside
neck
i cant find any diagram
.. thanks
-
What switch is on there right now? Is it also wired the way you want it wired or is it wired differently?
Also, I love the USRGs. Still want one for myself!!
-
it was a 3 way switch..I emailed dimarzio...they sent me a diagram and it's all resolved now..yes usrg30s are great guitars.....thanks
-
Another suggestion is to do a regular 3way switch and do a push-push pot for parallel wiring, which is humbucking. Then every pickup can have series/parallel sounds which gives you (6)total sounds. You can do an out of phase push/push and have around (9) sounds. Wiring looks simple and you’ll have as many sonic options as Jimmy Page!
This is a Duncan Pickup wiring scheme.
https://www.seymourduncan.com/wiring-diagrams?meta_params=guitar-options,2-pickups,neck-h,bridge-h,1-volume,1-tone,3-way-blade#schematic-results-count
https://www.mojotone.com/guitar-parts/Potentiometers_x/Mojotone-500K-Audio-Taper-Push-Push-Short-Shaft-Guitar-Potentiometer