hi! im trying to convert an HH Ibanez AZ's alter switch to a Push/Push pot, with the same pickup selection capabilties. and replace the pickups with dimarzio Rainmaker and Dreamcatcher pickups. i don't know too much about wiring and such but can anyone help me out with how ill go about achieving this. will i need any different parts and etc. and a diagram will help greatly if can be done.
Swapping the Alter switch to a push/pull shouldn't be difficult it it's a standard SPDT switch (it's only got one set of three connectors). The push-pull pot will have two different sets of connectors. One for the rotary pot itself and a set of connectors on the side for the push-pull. Just match the wiring on the original alter switch to the connectors on the side of the push-pull pot. If you get a push-pull with 6 connectors, just use one side.
As for swapping out the pickups. You can just follow the original wiring but swap the red wire on the DiMarzio where the "hot" wire from the Duncan goes(typically the black wire)