1

The Pickup Place / Re: FYI: ISCV2 Dimarzio Evolution Single

« on: February 02, 2019, 07:17:42 AM »

Model # ISCV2 (**NOT DP1116 which is the HS-2**)
DC Resistance: 12.54k
Output: 160mv
Magnet: Alnico 5

*note: this pickup is generally RWRP meaning it's wound backwards and will give you the hum-cancelling effect with your humbuckers if you have an HSH guitar with coil splits in positions 2 and 4*

Regards,

Budd

I contacted Dimarzio 6 years ago when I picked up an ISCV2 on thebay locally. The RWRP definition gets a bit lost in translation between different guitar brands. The ISCV2 from Dimarzio is wound Top Looking South Up Counter-Clockwise which makes it the same as a Fender neck pup.Not sure how this compares to the JEM S1

2

The Pickup Place / Re: Pickup used on Ibanez JEM middle position?

« on: January 25, 2019, 06:14:09 PM »

Thanks for the answear, so the old classic JEM's had that problem of the PAF Pro neck overpowering the PAF Pro bridge? I've never noticed that. But still I'm open to try another bridge pickup, maybe a Satur8?

But just out of curiosity, does someone knows if the single coil in the middle position on JEM's was a specific DiMarzio model? Or it was made by Ibanez?

That's why I want to know what DiMarzio single coil would be the closest to the JEM's?

Depends on the JEM model, most common is the Ibanez made S1 which is in your 570 others had the ISCV2 Dimarzio. They are all around 160mv output and similar spec to the Dimarzio FS-1.
The Ibanez HSH middle pup's are wound South CCW the same as a fender neck so make sure you have the correct wind sorted before purchasing a replacement such as a True Velvet.