Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
I like the Liquifire in the neck of Ibanez RG's and a PRS SE245 I have. Another neck pickup that is actually really similar, but a tad smoother is the Gravity Storm neck.
Good luck making an educated purchasing decision based on DiMarzio’s DCR specifications. Thankfully they provide really good and reliable product information. Seymour Duncan should take notice.I agree with Duncans. In the timeline they change some specs or re-calibrate, i'm not sure what it is but the values may change. The real problem is inconsistancy. I have seen many DCR values in a huge range, especially overwound humbuckers like JB. On the other hand i have seen Dimarzios from 80s, 90s or 2000s and specs are in a much narrower range and totally understandable.
I remember that chart and all of the Nazgûls being 666 mV. I also remember questioning the Full Shred Neck at 709 mV. I don’t have much confidence in any of it, to be honest. I’m not confident about SD’s published resonant frequency specifications either.
Nothing more.The magnet, wire gauge and TPL are far more critical than DCR. DCR needs to die a slow painful death.If it dies, pickup companies can't give any data. That's all they serve, unfortunately even for Dimarzio.
Just to be clear, the PATB-3 is the lowest output version of the three bridge models. The published specs show 9.8k DCR (42AWG) and 6kHz resonant frequency (same Fr as the SH-1 59B).Hey buddy, PATB-3 has more output than 59. Okay not the double of '59 but still has more meat than the '59
I had in the drawer JB/Jazz , so I tried them. Never liked JB by the way.
Of course , I have in mind also from SD Custom 5, and Parallel Axis PATB-3, just looking on the used marked to find a deal.
I have been always curious about Dimarzios, that's why would like to try some.
Greetings.
I would like to ask for some pickup recommendations.
The guitar I try to save, is Ibanez Darkstome, a massive guitar, sapele body and neck, on the heavy side like LP. The problem I have with this one, is it sounds dark to my years, somehow mid heavy. I have tried different combinations form SD, Bare Knuckle, House of Tone pickups, but this quest to buy and try starts to get somehow expensive at the end.
Would you recommend some all-round pickup set or combination? Good cleans and overdrives, some distortion tones. Standard tuning.
This probably will be the last try before go into actives, so hopefully some ideas will come.
Thanks in advance
As always, thank you for your reviews!
I know it's designed for the neck position, but it might be an interesting bridge pickup if you want a bit more power than the 36th bridge without the typically more congested lower mids of many higher output pickups, and you find the PAF Pro too bright in the bridge position. Maybe the regular Norton fills that niche, though?
Love the FRED in the bridge with a 250k volume pot - clear but not sharp highs, full mids, nice harmonics, a lot of fun to play.
Thanks for sharing.
Nice review. Always wanted to try a Super Distortion and wondering what to put in the neck of my HH Ibanez, found the answer.
