DiMarzio Forum

DimarzioForum.Com => The Pickup Place => Topic started by: Cliff mcclure on May 23, 2018, 09:55:09 AM

Title: Vintage id
Post by: Cliff mcclure on May 23, 2018, 09:55:09 AM

Old square feet . Braided shield , 2 lead , wHite hot , black also ground ... both sides work , testing either black or white as hot ... neither will work if I just use braided shield as ground .. Reads 8.65

Title: Re: Vintage id
Post by: DarthPhineas on May 23, 2018, 04:59:00 PM

Maybe some photos might help.

Also, have you asked the techs at DiMarzio?

Title: Re: Vintage id
Post by: buddroyce on May 25, 2018, 11:01:52 PM

I would guess it as an old DiMarzio PAF.

Title: Re: Vintage id
Post by: darkbluemurder on May 28, 2018, 04:51:28 AM

I agree to Budd.

Title: Re: Vintage id
Post by: bluesman on June 17, 2018, 03:25:24 PM

Sounds like an old PAF.

Dimarzio's vintage lineup was pretty simple. Definitely not an old Super Distortion or X2N. Don't know if DiMarzio actually made anything else that looked like a PAF back then.

Title: Re: Vintage id
Post by: slim_blues_boy on July 23, 2018, 07:26:51 AM

screws & slugs or hex screws?
because I just recently got double cream square tab with hex screws, I thought it was an old SD, the seller only advertised it as "vintage DiMarzio".
but then later I found it was a Super 2 instead of SD, DC resistance read 8k something.