« Reply #6 on: April 21, 2015, 11:57:35 AM »
You can replace pickups in about half an hour. You need a 25 or 30 watt soldering iron, solder, a piece of sponge and a screwdriver or 2.
Fully agree.
What also comes in handy is a long piece of insulated stranded wire (1.5 to 2 ft). When you desolder a pickup from its connections solder the wire to one of the pickup's wires. When you remove the pickup you automatically pull the wire through the wire channel. When you solder the new pickup to the wire you just pull on the wire, and the wire of the new pickup (provided it is long enough!) comes in without a hassle.
Cheers Stephan
Logged
Area 67, Area 58, Area 61, VV Pro 54, Injectors, VV HB2, Virtual Solo, SDS-1, Area T, Area Hot T, Area T 615, Virtual Hot T, Chopper T, Bluesbucker, Breed set, Air Norton, Super Distortion, DLX+ set, DLX-90, DP240, DP198, DP168, VPAF b, AT-1, Mo' Joe, FRED, Super 2; GS b