DiMarzio Forum
DimarzioForum.Com => The Pickup Place => Topic started by: THERATT on August 04, 2016, 12:24:33 PM
-
I am building a custom tele with the x2n in the neck position and the super distortion T in the bridge with 500k push pull pots for coil tapping on both pickups. Is this a good combo for a metal type sound or will the x2n be muddy?
-
Never tried this particular combo but an X2N in the neck could possible overpower just about everything you could put in the bridge. I would't do it but then again I never thought a Tone Zone could work in the neck either...
-
so its never been done. well I will let you know how it turns out.
-
Never tried this particular combo but an X2N in the neck could possible overpower just about everything you could put in the bridge. I would't do it but then again I never thought a Tone Zone could work in the neck either...
It might work, but you need a very powerful bridge pickup, and you might also have to set the X2N in the neck far away from the strings
-
Well, it will be interesting no doubt. I might think about going Series/Parallel/split on the X2N…just in case. Super flexible that way.
Or just plain swap and put a SuperD in the neck and whatever a X2N Tele is in the bridge.
How are you going to USE the neck? Solos only? Might be awesome.
-
How are you going to USE the neck? Solos only? Might be awesome.
Very important aspect. I have heard of people using a DiMarzio PAF in the bridge for rhythms and a SD in the neck for leads which worked fine for them. Personally I would do it the other way around but I use mainly the bridge pickup for leads.
Cheers Stephan