DiMarzio Forum

DimarzioForum.Com => Gear Closet => Topic started by: jcknowles89 on May 10, 2018, 01:26:39 PM

Title: Plate Bypass Cap for EVH 5150 III
Post by: jcknowles89 on May 10, 2018, 01:26:39 PM
Hello All!

Looking to add a Plate bypass Cap to the last gain stage and possibly the last two of the Red channel of EVH 5150III to cut back the high end fizzle. Any suggestions on values? Seems like BE-100 uses 500pf caps, Dual Rec uses 220pf, and SLO 100 uses 1000pf. Any suggestions? also if let me know if I should consider doing this to other gain stages instead of V3 or V4.

Schematic Attached.

Thanks,
Title: Re: Plate Bypass Cap for EVH 5150 III
Post by: buddroyce on May 11, 2018, 10:51:44 PM
It's going to be hard to recommend a value. Caps are fairly cheap though, I would honestly just get a bunch of different values and try them out.
Title: Re: Plate Bypass Cap for EVH 5150 III
Post by: darkbluemurder on May 14, 2018, 04:07:49 AM
What Budd said. Ultimately it is personal preference.

Cheers Stephan