Author Topic: Shawbucker noise  (Read 117 times)

Offline moise

  • Newbie
  • *
  • Posts: 7
  • Karma: 0
    • View Profile
Shawbucker noise
« on: May 20, 2020, 12:37:47 am »
Hi, I have a Shawbucker on the bridge position and it has some noise, itís not terrible but when I change to the neck position (Fast Track 1) itís dead quiet. I have triple checked the grounding and itís all good. Any ideas?

Thanks in advance.
Dimarzio pickups used: Virtual Solo, Virtual Heavy Blues 2, HS-3, HS-2

Offline darkbluemurder

  • Hero Member
  • *****
  • Posts: 1185
  • Karma: 39
    • View Profile
Re: Shawbucker noise
« Reply #1 on: May 20, 2020, 02:16:01 am »
The DiMarzio dual rail single coil sized humbuckers and the Area series are quieter than many regular sized humbuckers. I would say if you tested with a high gain amp/pedal setting, that is normal to some extent. In a clean setting there should not be much of a difference.

Cheers Stephan
Area 67, Area 58, VV Pro 54, Injector neck, HB2, Cruisers, Virtual Solo, SDS-1, Area T set, Area Hot T, Area T 615, Virtual Hot T, Chopper, Chopper T, Bluesbucker, Breed set, Air Norton, SD, DLX+, DLX-90, DP240, DP198, VHPAF, AT-1, Morse set, Super Distortion S; Norton