« Reply #1 on: May 15, 2020, 02:54:01 AM »
The Areas usually work best with 250k pots, whereas DiMarzio recommends 500k with the Pro Track. What I would do is use a 500k volume pot and 250k tone pots. I would choose a wiring which adds a 560k or 470k resistor to ground for the switch positions except the bridge position alone so that the Pro Track sees 500k and all other positions see approx. 235k - 260k. I see whether I can find a diagram for this.
Cheers Stephan
Logged
Area 67, Area 58, Area 61, VV Pro 54, Injectors, VV HB2, Virtual Solo, SDS-1, Area T, Area Hot T, Area T 615, Virtual Hot T, Chopper T, Bluesbucker, Breed set, Air Norton, Super Distortion, DLX+ set, DLX-90, DP240, DP198, DP168, VPAF b, AT-1, Mo' Joe, FRED, Super 2; GS b