Author Topic: Custom Super Switch Wiring Request  (Read 487 times)

Offline Noisy Humbucker

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Custom Super Switch Wiring Request
« on: March 07, 2020, 02:03:09 am »
Hello folks,

Figured I’d try my luck over here for help wiring up my new Tone Zone and Air Norton set.  My Charvel has one volume and one tone, here’s what I’m trying to pull off with the 5-way (ordered the way DiMarzio does their schematics):
1. Neck series
2. Neck (South) and Bridge (North) split parallel
3. Neck (North) and Bridge (South) split parallel
4. Bridge split (North)
5. Bridge series

Any and all help appreciated!
« Last Edit: March 07, 2020, 02:06:24 am by Noisy Humbucker »

Offline darkbluemurder

  • Hero Member
  • *****
  • Posts: 1231
  • Karma: 43
    • View Profile
Re: Custom Super Switch Wiring Request
« Reply #1 on: March 09, 2020, 05:19:35 am »
Is this a 22 fret guitar? If so I would consider changing one of the positions 2 or 3 to something else as they will not sound much different from each other. With a 24 fret guitar they do sound different enough to keep both (in my opinion).

Cheers Stephan
Area 67, Area 58, Area 61, VV Pro 54, Injector neck, VV HB2, Virtual Solo, SDS-1, Area T, Area Hot T, Area T 615, Virtual Hot T, Chopper T, Bluesbucker, Breed set, Air Norton, Super Distortion, DLX+, DLX-90, DP240, DP198, VHPAF, AT-1, Norton, Injector bridge