DimarzioForum.Com > The Pickup Place
Wiring schematics and stuff
slugworth:
Worth adding to this thread -- Dimarzio has added a LOT of useful wiring diagrams to their site.
http://dimarzio.com/support/wiring-diagrams
albagnino:
Hello! I would install 3 EMG pickups HSH with a Super Switch, 1 tone and 1 volume .. I tried a scheme anywhere, but to no avail! I made a few attempts, but there is something that does not work ... the configuration would be:
1 bridge
2 bridge + center
3 center
4 neck + center
5 neck
I made a draft of the wiring diagram, but I'm stuck .. how complete connections?can someone help me please? I am going crazy!!
thank you
Amuri:
Hi, Im completely new to guitar wiring, and Im in desperate need of your expertise !
here is the situation :
I have bought 3 new pickups for my Ibanez
Bridge : Seymour duncan 59/CUSTOM HYBRID SH-16 : http://www.seymourduncan.com/pickup/59custom-hybrid
Middle : Seymour duncan VINTAGE HOT STACK PLUS STRAT STK-S7 http://www.seymourduncan.com/pickup/...ack-plus-strat
Neck : Dimarzio PAF® Master Neck DP260 : http://www.dimarzio.com/node/8199
The original 5 way switch wiring of Ibanez utilizes the pickups like this:
https://drive.google.com/open?id=0B7...mlHQ3p3clktUlU
and I want to split 59 coil with middle pickup and outer coil(screw coil) of the neck with mid in position 4 and 2
like this :
https://drive.google.com/open?id=0B7...VJZQTFlZ2VoYUk
and here is a picture of my 5 way leveler (or switch):
https://drive.google.com/open?id=0B7...FVhMUR6WDgxdHc
I DONT KNOW HOW TO WIRE THAT TO GET WHAT I WANT!?
I've been googling , I have read the Duncan GUITAR WIRING DIPLOMA COURSE! and most of the forum here and there .... couldn't figure it out
do I need super switch ?!
also , Im open to suggestions for getting a even level sounding wirings!
darkbluemurder:
Hi,
Unfortunately the google drive links you posted are not working for me but I understand that you want the following combinations:
#1 bridge
#2 bridge split (neckside coil) + middle
#3 middle
#4 neck split (neckside coil) + middle
#5 neck
You don't need a super switch for that. This wiring can be done with a regular 5 way switch (you may have to change the wiring on the neck pickup slightly from the normal wiring to get the neckside coil active in split mode but that is doable) or with an Eyb Megaswitch type E.
Before going into the details we should first clarify whether these are the combinations you want.
Cheers Stephan
darkbluemurder:
Seems like DiMarzio reorganised their website but in relation to the wiring schematics not in a good way IMHO. Where did all those useful diagrams for two humbuckers and the EP1112 switch go?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version