Author Topic: The Bluesbucker  (Read 23185 times)

0 Members and 1 Guest are viewing this topic.

Offline CityofBlindingLights

  • *Site Supporter*
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3358
  • Karma: 87
  • THIS IS MADNESS
    • View Profile
The Bluesbucker
« on: June 01, 2009, 11:49:36 pm »
A highly overlooked pickup, the Bluesbucker is imho one of DiMarzio's best pickups. It's meant to sound like a P90 that looks and fits into a rout for a humbucker, and it does its job beautifully. Oh yeah, and it's fully hum-cancelling.

Where the Bluesbucker REALLY shines though is when it is tapped. Since the screw coil is activated whenever this pickup is tapped, it also sounds really neat when installed backwards, in either neck or bridge orientation; it almost sounds Tele-like.

Offline buddroyce

  • *Fake VIP*
  • Administrator
  • Hero Member
  • *****
  • Posts: 2512
  • Karma: 86
  • Founder
    • View Profile
    • BRL Guitarworks
Re: The Bluesbucker
« Reply #1 on: August 31, 2009, 10:44:55 am »
I would like to add that in addition to being a great pickup for vintagey tones, it also handles lighter modern rock tones quite well as well as working extremely well under high gain as a neck pickup.

Running the Bluesbucker in parallel yields a tone that's somewhere in between a P90 and a true single coil, which is actually quite nice!
Founder - DiMarzioForum.Com
Follow me on Twitter

Offline slugworth

  • Hero Member
  • *****
  • Posts: 1120
  • Karma: 65
    • View Profile
Re: The Bluesbucker
« Reply #2 on: November 09, 2009, 04:37:54 pm »
Some thoughts about Bluesbucker in the neck...

I don't have extensive experience with P90's but I have played my share.  Bluesbucker to me sounds like a sweet, delicious P90.  Maybe not quite as gritty as some.  In parallel it sounds a *LOT* like position 4 or 5 in a strat and is quite a bit brighter than in series.  This pickup is very sensitive and responsive to volume and tone adjustments, even more so in parallel.  And coil tapped is in the telecaster realm.

If you are considering a Duncan P-Rails, then you should also consider a Bluesbucker.  I have a P-Rails in the neck of one guitar, set up for switching between series, parallel, P90, and single coil.  If you set up the Bluesbucker to switch between series, parallel, and single coil, it definitely covers the same ground as the P-Rails, with the only exception being the full series humbucker mode of the P-Rails.  The P-Rails is a hot, beefy humbucker with a considerable amount more balls than I would have expected.  But if you can do without the humbucker balls, then Bluesbucker is the ticket.

I think the Bluesbucker just sounds sweeter than the P-Rails, though.  I know that's a completely subjective thing, but I don't know how else to put it.  If you're one of those guys who doesn't believe that volume and tone knobs are necessary, then either the Bluesbucker will teach you that they ARE, or you will probably not be crazy about it.  Also, personally speaking, having a Bluesbucker in the neck completely solves my previous need for a strat, because it will do absolutely everything I'd want (and more) from a strat. 
« Last Edit: November 12, 2009, 01:59:40 pm by slugworth »
DIMARZIO MODELS CURRENTLY OR PREVIOUSLY OWNED: 52 TOTAL

Offline rgdxpn

  • Jr. Member
  • **
  • Posts: 92
  • Karma: 2
    • View Profile
Re: The Bluesbucker
« Reply #3 on: March 18, 2010, 11:01:11 am »
I'm very excited about the bluesbucker....I'm trying to find a place that has it in stock.  I'll post a good review here when I get her up and running.

Offline rgdxpn

  • Jr. Member
  • **
  • Posts: 92
  • Karma: 2
    • View Profile
Re: The Bluesbucker
« Reply #4 on: April 27, 2010, 12:41:09 am »
Ok that being said, here's an updated review of the Bluesbucker.

Ok, the cleans are killer.  Pos 2(split) is very very stratty, and pos 1 is very neck single with a touch more mids and chunk and power....in a very good way. Has some of the quack and thonk, with some of that greasy single coil stuff in the mix....Since it is more focused it makes the bass more controllable.  The amount it has is perfect.

Have to say it does what they say it does.  I would say it sounds more single than p90 but with more power.  Which is a good thing.  It gets nasty but still refined when you dig in and can sweeten nicely when you soften your attack.....

I still have the screws towards the neck.  This pickup is staying.....you want neck shred....It does it.  you can really hear how it's more focused...since I tweaked my setup(previous post).....I'm totally stoked with the stratty sounds it brings to my ibby.  This pickup is a definitely keeper.

Still amazed how much the copper effected the tone of my instrument.

Offline rgdxpn

  • Jr. Member
  • **
  • Posts: 92
  • Karma: 2
    • View Profile
Re: The Bluesbucker
« Reply #5 on: June 07, 2010, 01:08:24 pm »
This is a bit later with some tweaks I tried.  Tried raising the poles on a few strings and lowering the pickup at the same time.  B4 I thought it could use a few tweaks:

I felt the g string could use more cut and volume, the d string was a lil' lower in volume and that all of the lower 4 strings could use a bit of snap and could perhaps be a bit more open.(

After raising the poles on the last 4 strings by ear and dropping the bass side slightly, raising the 2 middle strings the highest to compensate for radius I can say this is pretty much a dream come true for guys with RGs who want the fat single coil sound out of the neck position.......

Really a trip....even with very high gain it stays clear....playing some rhythm(w/hi gain) on it, even some pinch harmonics.

It works for this guitar, 92' RG550DXPN....maple fretboard....single rs superpot 500k and a 5-way soldered all with ocean wire.

Offline slugworth

  • Hero Member
  • *****
  • Posts: 1120
  • Karma: 65
    • View Profile
Re: The Bluesbucker
« Reply #6 on: November 05, 2010, 07:21:46 pm »
I want to update my continued experience with the Bluesbucker.  I'm normally a humbucker-only guy, but I've spent a lot of time with real P90s and other single coils since my earlier post here to give me a better perspective.

First off, if you are looking for a strat-a-licious tone in a warm/darkish guitar (i.e. mahogany), get a Bluesbucker, install it in normal orientation, and wire it up for switching to parallel.  You are in for a treat.  I would compare it to the Dimarzio Chopper but with less mids... which is a great thing for mahogany because the wood is going to give you all those mids.

In series installed in normal orientation, this thing is kinda halfway between a P90 and a PAF, in a very good way.  It is a little smoother than a typical P90, and it has a little more mass behind the tone than single coils.  It's got a very sweet sound, though.  The harmonics are very, very nice.  Nothing overboard, but definitely the bubbly kind of neck harmonics you'd expect from Slash or similar.

If you are looking for vintagey single coilish sounds in a humbucker spot, this has you covered.  To me the touch of PAF flavor is an added bonus.  As time has passed, my love for the Bluesbucker has only grown, where my love for the Duncan P-Rails has completely vanished.
« Last Edit: November 06, 2010, 10:14:27 am by slugworth »
DIMARZIO MODELS CURRENTLY OR PREVIOUSLY OWNED: 52 TOTAL

Offline JohnnyGtar

  • Full Member
  • ***
  • Posts: 180
  • Karma: 3
    • View Profile
Re: The Bluesbucker
« Reply #7 on: August 10, 2012, 08:33:41 am »
Wow. I LOVE this thing. It's in the neck position of my 1977 Ibanez Artist model #2618. Mine was modded...the previous owner had a Floyd Rose installed in 1986. This model guitar has 24 frets as opposed to 22. The Bluesbucker is great in a 24 fret gtr with the screw polepieces *toward* the neck. Lots of ppl don't like the sound of a neck humbucker in a 24 fret guitar, but using the Bluesbucker in the manner I've stated bring back a LOT of that juicy throatyness, since only the screw coil is producing sound. (It's all about the aperture with this bad MO FO! Also, I used a Bluesbucker in the bridge of a Charvel 475. (Basswood body) It KILLS for hard rock and metal. I installed it with the screw coil facing the neck as well. The extra definition and screaming harmonics when installed in my Charvel were a flat out revelation.
« Last Edit: August 10, 2012, 08:37:28 am by JohnnyGtar »

Offline Butch Snyder

  • Full Member
  • ***
  • Posts: 178
  • Karma: 5
    • View Profile
Re: The Bluesbucker
« Reply #8 on: April 21, 2013, 04:21:47 pm »
So, if I had a Telecaster, and I wanted to put a humbucker in the neck position, and keep the 250k pots, the Bluesbucker might be the answer?  I have just that; a Telecaster with a Strat pickup in the middle position.  I want to install a humbucker in the neck position, but in my experience, humbuckers with 250k pots tend to be too dark; while single coils with 500k pots, tend to be too bright.

I could get a Tone Shaper from Acme, but I think a Bluesbucker would fit the bill and be cheaper.
-Butch Snyder

Offline darkbluemurder

  • Hero Member
  • *****
  • Posts: 951
  • Karma: 31
    • View Profile
Re: The Bluesbucker
« Reply #9 on: March 10, 2014, 07:15:47 am »
Another Bluesbucker fan here.

I use it in the neck position of a bright Telecaster, together with a Chopper T at the bridge. I have a Megaswitch Type E which gives me full humbucker bridge, single coil bridge, both as single coils, single coil neck and full humbucker neck. I use a 500k log pot for volume and a 250k pot for tone. In the switch positions #2 and #4 a 470k resistor is added in parallel so the single coils "see" a load close to 250k.

The Bluesbucker shines both in humbucking and single coil mode. While to me it does not "exactly" sound like a P90, it really has that P90-like clarity on the low strings without being muddy. Yet it does not thin out on the higher strings but keeps a fat tone even in the upper registers of the fretboard. And the split tone is almost as loud as the humbucker tone - no significant drop in gain, which is definitely a plus. I don't know of any other humbucker who achieves this. Very very nice indeed.   

Cheers Stephan
« Last Edit: March 13, 2014, 06:36:57 am by darkbluemurder »
Own: Area 67, Area 61, Area 58, VV Pro 54, Injector n, HB2, Cruisers, VSolo, SDS-1, Area T set, Virtual Hot T, Chopper, Chopper T, Bluesbucker, Breed set, Air Norton, Super D, DLX+, DLX-90, DP240, DP198, VHPAF, AT-1, Morse set
Owned: PAF Pro, Fred, Mega Drive, HS-1, HS-3T, Shock Wave set, Tone Zone

Offline Marco78

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
Re: The Bluesbucker
« Reply #10 on: July 27, 2014, 04:26:43 pm »
Hi boys, I'd to install this pickups in a Ibanez Ar220. This guitar have the tri switch so each pickups can be selected as single, hb series or parallel. Is it good in this way too???

Thanks

Offline slugworth

  • Hero Member
  • *****
  • Posts: 1120
  • Karma: 65
    • View Profile
Re: The Bluesbucker
« Reply #11 on: September 16, 2014, 05:25:52 pm »
Yeah, you'll like it. Maybe not as huge of a difference in the split and parallel modes as other pickups, but it will be great in that guitar.
DIMARZIO MODELS CURRENTLY OR PREVIOUSLY OWNED: 52 TOTAL

Offline morski

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Re: The Bluesbucker
« Reply #12 on: December 26, 2014, 05:04:19 pm »
Hi guys!

I recently installed the bluesbucker into the neck position of my old Ibanez Blazer. I wanted to replace an early eighties DP103 that the previous owner had installed that I found to be kind of a muddy sounding. The difference was astounding, sweet and glassy tones while retaining the beefynes of a humbucker. I dont think the bluesbucker sounds particularly like a P90. In my opinion it's more like a very airy and 3d sounding humbucker. I think I still need to adjust the PU height though.

Here's a link to a sound clip from my bands rehearsal (excuse me for the sloppy playing). I had the PU selector in the middle position, the bridge PU is an Ibanez Super 70 and the solo is purely the Bluesbucker. The recording is done with an Zoom H4 from a couple of meters away from the guitar cabinet.

https://soundcloud.com/alicealoof/st-james-infirmary-blues-cover

Cheers!

-K

Offline mertay

  • Newbie
  • *
  • Posts: 37
  • Karma: 2
    • View Profile
Re: The Bluesbucker
« Reply #13 on: January 05, 2015, 02:28:04 pm »
Played it first time today on a 20 year old Epi LP (neck only). Vintage humbucker-like sweet top end but overall brighter. I wouldn't say single coil like glassy but pretty close, maybe closer if tapped.

On distortion though it gets more humbucker like, reminds me of a paf pro actually but lighter. It can do extreme distortion but not the most ideal neck PU, the definition is not very fun sounding on shred.

I'd take the bluesbucker for the cleans and distortion for the paf pro on neck if it makes sense...

My friend paired it with a screaming demon, I felt the bluesbucker's low-end was a bit overpowering the demon (on cleans!) so we raised the demon a bit to make the middle switch position sound more mid dominated.

Worked really nice, endless LP sustain on distortion with bridge PU and open but ballsy cleans on neck. Now the guitar has a uniqe vibe to it :)

Offline darkbluemurder

  • Hero Member
  • *****
  • Posts: 951
  • Karma: 31
    • View Profile
Re: The Bluesbucker
« Reply #14 on: January 19, 2015, 04:57:32 am »
Just very recently I found that the Bluesbucker sits really well in the neck spot of 24 fret guitars.
Own: Area 67, Area 61, Area 58, VV Pro 54, Injector n, HB2, Cruisers, VSolo, SDS-1, Area T set, Virtual Hot T, Chopper, Chopper T, Bluesbucker, Breed set, Air Norton, Super D, DLX+, DLX-90, DP240, DP198, VHPAF, AT-1, Morse set
Owned: PAF Pro, Fred, Mega Drive, HS-1, HS-3T, Shock Wave set, Tone Zone